MORE parts updates!

So i got unlucky with the box 2 of 2, it got caught in customs and i've got a bill for $250 for GST to pay

Boooo!

They're charging me GST on the entire order too, rather than just the box they got.

Double boo!

Comments

Post a Comment

Popular posts from this blog

More stuff arrives, and "deoderized" fish oil

So, now I've been thinking through reassembly and the bits and pieces I'd need to get it together. I've rebuilt the pedals, painted them etc. heater box i repainted with epoxy. Pulled the master cylinders apart and got them down to the shop for a light honing. Dropped the rear axles and the hub puller to the mechanic as i dont have the 17mm allen key drive to pop them. Dropped all the suspension parts to the mechanic to put the bushes in. all sorts. As i was going through in my head the assemble process i realised a couple of things: Trunion kits dont contain the top seal,  My heater valve was completely shot (would explain why the car was always warm inside),  Complete bush kits dont contain shock bushes, or rear diff bushes.  You can get a set of solid brake lines made to length in the UK and shipped to NZ for about 1/2 the cost you can get them made here. There's quite a lot of triumph parts for sale at good prices on ebay. Canley classics parts are still ...
Read more

Wheel bearings and other such stuff

Image
So some updated photos, Different angle Not all this work was done this week, the steering rack, wishbones, sway bar were all done last week. This week the uprights were attached, brake lines fitted. new wheel bearing fitted to the front. Found out i had a set of the kits that had the absolutely rubbish grease seals in them, the metal casing is too big and the felt is about 12mm wide, if you try and fit them nothing lines up at all. I removed the casing and reused the old one. took the felt out and cut them to about 1/2 thickness fitted them and they all look ok. I got them from Rimmer Bros, so I'll have to drop them a line tomorrow to see what they have to say. Fitted in the diff, put the read shocks and vertical links in to visualise where i needed to run the brake lines. The two tone paint job is due to using two pots of paint, the first (the lighter one) was the one i managed to spill half of. I looked at the rear axles but i ran out ...
Read more

It all started along time ago....

So whats this all about? Well its probably more for me than anyone else. I've decided to set this up to document the rebuild of my 1968 13/60 Triumph Herald Saloon. If you're reading this maybe there might be something in here that will help you along the way, maybe not :) First some history I purchased Ed (a nickname from his license plate) back in 2003/04 as a non runner, he had been sitting under a tarp in someones driveway for quite a few years.  He was in a pretty sorry state of disrepair but had very solid bones. (nothing much but surface rust) My mate Anthony and i went out to have a look at him and even though i was looking for a GT6 at the time, i decided for the $200 they were asking i would be silly not to. And so the journey began. We originally were going to tow him the 16km back to my house but after throwing a new battery in him and some fresh gas he started after a few cranks and i decided to drive him back under his own steam to assess the running gea...
Read more